HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 62

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 1 New and Changed Features for Release 3.x (continued)
Feature GUI Change
FICON port None
numbering
McDATA native McDATA tab
interoperability
Certificate authorities PKI item under Security Describes interoperating with
and digital
certificates
IKE identity IKE item under Security Enables an IKE identity host name
IKE key host name Pre-Shared AuthKey tab
under Security, IKE
AAA server AAA folder under
enhancements Security
MS CHAP AuthTypeMSCHAP
check box under
Security, AAA, General
tab
Fabric binding for Fabric Binding under
Fibre Channel VSAN, Domain
Manager
FCIP tape read ---
acceleration
iSCSI server load ---
balancing (iSLB)
Cisco MDS 9000 Family Fabric Manager Configuration Guide
lxii
Description
Provides information on the
changed default port numbering
scheme for Generation 2 hardware
and how to assign port numbers
when a switch has more than 255
ports.
Describes how to configure
McDATA native mode
interoperability.
Certificate Authorities and using
digital certificates for secure
communication with peers.
or IP address to be specified in the
IPsec domain.
Enables IKE identity host name to
be specified instead of an IP address
for preshared keys.
Includes the following AAA server
enhancements:
Validating the availability of
•
remote AAA servers
Allowing users to specify a
•
remote AAA server name at
login
Displaying AAA server statistics.
Provides support for the Microsoft
Challenge Handshake
Authentication Protocol
(MSCHAP).
Supports fabric binding for Fibre
Channel VSANs as well as FICON
VSANs.
Supports tape read acceleration
over FCIP interfaces as well as tape
write acceleration.
Provides information about how to
easily configure large iSCSI
deployments.
New and Changed Information
Changed
in
Release Where Documented
3.0(1) Chapter 36, "Configuring
FICON"
3.0(1) Chapter 37, "Advanced
Features and Concepts"
3.0(1) Chapter 43, "Configuring
Certificate Authorities
and Digital Certificates"
3.0(1) Chapter 44, "Configuring
IPsec Network Security"
3.0(1) Chapter 44, "Configuring
IPsec Network Security"
3.0(1) Chapter 41, "Configuring
RADIUS and TACACS+"
3.0(1) Chapter 41, "Configuring
RADIUS and TACACS+"
3.0(1) Chapter 47, "Configuring
Fabric Binding"
3.0(1) Chapter 48, "Configuring
FCIP"
3.0(1) Chapter 50, "Configuring
iSCSI"
OL-8007-10, Cisco MDS SAN-OS Release 3.x