Detailed Smartports Statements - Cisco WS-C6506 Software Manual

Catalyst 6500 series switch
Hide thumbs Also See for WS-C6506:
Table of Contents

Advertisement

Using SmartPorts
All ingress and egress QoS scheduling parameters configured on all ports.
CoS to DSCP, DSCP to COS, IP Precedence to DSCP and policed dscp maps
configured.
Port 3/1 ingress QoS configured for Cisco IP Phone.
Macro completed on port 3/1.
Console> (enable)
If you do not specify an auxiliary VLAN, the following warning message displays:
Console> (enable) set port macro 3/1 ciscoipphone vlan 2
Warning:
vlan was specified.
Do you want to continue (y/n) [n]?
ciscosoftphone Command Output
When you enter the ciscosoftphone keyword, the following displays:
Console> (enable) set port macro 3/1 ciscosoftphone vlan 32
Port 3/1 enabled.
Layer 2 protocol tunneling disabled for CDP STP VTP on port(s) 3/1.
Port 3/1 vlan assignment set to static.
Spantree port fast start option set to default for ports 3/1.
Port(s) 3/1 channel mode set to off.
Warning: Connecting Layer 2 devices to a fast start port can cause
temporary spanning tree loops. Use with caution.
Spantree port
Dot1q tunnel feature disabled on port(s)
Port(s)
Vlan 32 configuration successful
VLAN 32 modified.
VLAN 2 modified.
VLAN
---- -----------------------
32
Port 3/1 will not send out CDP packets with AuxiliaryVlan information.
Executing autoqos........
All ingress and egress QoS scheduling parameters configured on all ports.
CoS to DSCP, DSCP to COS, IP Precedence to DSCP and policed dscp maps
configured.
Port 3/1 ingress QoS configured for Cisco Softphone.
Macro completed on port 3/1.
Console>> (enable)

Detailed SmartPorts Statements

These sections provide the detailed SmartPorts macro statements:
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
55-42
Global QoS configured.
All inbound QoS tagging information will be lost as no auxiliary
3/1 fast start enabled.
3/1 trunk mode set to off.
Mod/Ports
3/1
16/1
Global QoS configured.
ciscoipphone Macro Statement, page 55-43
ciscosoftphone Macro Statement, page 55-43
Chapter 55
3/1.
Configuring a VoIP Network
OL-8978-04

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 6506Catalyst 6509Catalyst 6513

Table of Contents