Cisco WS-C6506 Software Manual page 374

Configuring MLS
Using Debug Commands on the MSFC
Table 14-6
problems on the MSFC.
Table 14-6
Command
[no] debug l3-mgr events
[no] debug l3-mgr packets
[no] debug l3-mgr global
[no] debug l3-mgr all
Table 14-7
problems when using the MSFC as an external router for a Catalyst 5000 family switch.
Table 14-7
Command
[no] debug mls ip
[no] debug mls ipx
[no] debug mls rp
[no] debug mls locator
[no] debug mls all
Using Debug Commands on the SCP
Table 14-8
SCP that runs over the Ethernet out-of-band channel (EOBC).
Table 14-8
Command
[no] debug scp async
[no] debug scp data
[no] debug scp errors
[no] debug scp packets
[no] debug scp timeouts
[no] debug scp all
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
14-18
describes the MLS-related debug commands that you can use to troubleshoot the MLS
MLS Debug Commands
describes the MLS-related debug commands that you can use to troubleshoot the MLS
MLS Debug Commands—External Router Function
describes the Serial Control Protocol (SCP)-related debug commands to troubleshoot the
SCP Debug Commands
Description
Displays the Layer 3 manager-related events.
Displays the Layer 3 manager packets.
Displays the bug trace of IP global purge events.
Turns on all the Layer 3 manager debugging messages.
Description
Turns on the IP-related events for MLS including route purging
and changes of access lists and flow masks.
Turns on the IPX-related events for MLS including route
purging and changes of access lists and flow masks.
Turns on the route processor-related events.
Identifies which switch is switching a particular flow by using
MLS explorer packets.
Turns on all the MLS debugging events.
Description
Displays the trace for asynchronous data in and out of the SCP
system.
Displays the packet data trace.
Displays the errors and warnings in the SCP.
Displays the packet data in and out of the SCP system.
Reports the timeouts.
Turns on all the SCP debugging messages.
Chapter 14 Configuring MLS
OL-8978-04