Cisco WS-C6506 Software Manual page 395

Chapter 14 Configuring MLS
Router IP
-------------------------------------------------------
1.1.5.252
Transmit:
Delete Notifications:
Acknowledgements:
Flow Statistics:
Receive:
Open Connection Requests:
Keep Alive Messages:
Shortcut Messages:
Console (enable)
Clearing IP MMLS Statistics
The clear mls multicast statistics command clears the IP MMLS statistics for all the participating
MSFCs.
To clear the IP MMLS statistics, perform this task in privileged mode:
Task
Clear the IP MMLS statistics.
This example shows how to clear the IP MMLS statistics:
Console> (enable) clear mls multicast statistics
All statistics for the MLS routers in include list are cleared.
Console> (enable)
Displaying IP MMLS Entries
The show mls multicast entry command displays information about the multicast flows that are handled
by the PFC. You can display the entries that are based on any combination of the participating MSFC,
the VLAN, the multicast group address, or the multicast traffic source.
To display information about the IP MMLS entries, perform this task in privileged mode:
Task
Display information about the IP MMLS
entries.
OL-8978-04
Router Name
?
Shortcut Install TLV:
Selective Delete TLV:
Group Delete TLV:
Update TLV:
Input VLAN Delete TLV:
Output VLAN Delete TLV:
Global Delete TLV:
MFD Install TLV:
MFD Delete TLV:
Router MAC
00-10-29-8d-88-01
22
75
22
1
68
6
4
2
0
0
0
0
0
4
0
Command
clear mls multicast statistics
Command
show mls multicast entry [[[mod] [vlan vlan_id]
[group ip_addr] [source ip_addr]] | [all]]
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Configuring MLS
14-39