How To Upgrade Xt Series To This Release - Avaya Scopia XT Series Release Notes

How to Upgrade XT Series to this Release

Software upgrade packages named XT5000_Vx_y_z.exe can be used only to upgrade Scopia®
XT5000/XT4300/XT4000/XTE240 Series Codec Units.
Software upgrade packages named XT7000_Vx_y_z.exe can be used only to upgrade Scopia®
XT7000 Series Codec Units.
To upgrade the software of an XT Series Codec Unit:
Figure 74: Software Upgrade Application
Release Notes for Avaya Scopia® XT Series
o
Save the XTn000_vx.y.z.exe file containing the XT Series Software in your
Windows PC
o
Verify that the PC is connected to the network in wired mode (otherwise the
upgrade process can be very slow when using a wireless connection) and that it
can ping XT.
o
Double click the version .exe file. Below application will be launched.
o
Insert IP address of the XT to upgrade in the Codec Unit IP address field.
Press "Start" button in the app.
o
o
Do not turnoff or unplug XT, until it completes the upgrade.
o
The application will signal that the upgrade is completed. Verify that the XT is
restarting.
Caution
o
Do not turn off the system until the upgrade procedure is completed.
o
The system LED may blink repeatedly while upgrading.
o
If you are upgrading from a 3.0/3.1 version of XT5000/XT4000, the upgrade
procedure may reboot more than once while upgrading. A 30 to 40-second
interval may occur between the reboots.
o
If the upgrade procedure is INTERRUPTED for any reason, do NOT restart the
Codec Unit but repeat the procedure as suggested by the Codec User Interface.
o
If the GLAN interface is not reachable any more, put the .exe upgrade package
into a formatted USB key and insert it into the upper USB socket.
o
This procedure is completed when you see the initial graphical menu displayed
continuously for at least one minute.
Important
o
Since version 8.3 is a Major Release for Scopia® XT Series Codec Units, a new
license might be required for this upgrade if the endpoint is not under
Maintenance Contract. The codec can in any case work in preview mode without
a license for 30 days (Power ON time – countdown is suspended when the
system is OFF).
How to Upgrade XT Series to this Release | 63