Show Ipif; Show Switch - D-Link DGS-1210 Series Manual

6 Command Line Interface
DGS-1210-52MP>

show ipif

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display IP interface settings:
DGS-1210-52MP> show ipif
IP Setting Mode
Interface Name
Interface VLAN Name
IP Address
Subnet Mask
Default Gateway
DHCPv6 Client State
DGS-1210-52MP>

show switch

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the switch information:
DGS-1210-28MP> show switch
System name
System Contact
System Location
System up time
System Time
System hardware version
To display the configuration of an IP interface on the Switch.
show ipif [<ipif_name>]
The show ipif command displays the current IP address of the
switch.
<ipif_name> − Specifies the IP interface name to be displayed.
None.
: Static
: System
: default
: 10.90.90.90
: 255.0.0.0
: 0.0.0.0
: Disabled
To display the information of the Switch.
show switch
The show switch command displays the status of the switch.
None.
None.
:
:
:
: 2 days, 0 hrs, 0 min, 52 secs
: 02/01/2020 23:59:50
: F2
156
D-Link Smart Managed Switch User Manual