Default Standard Qos Configuration; Default Ingress Queue Configuration - Cisco WS-CBS3032-DEL Software Configuration Manual

Software guide
Table of Contents

Advertisement

Configuring Standard QoS

Default Standard QoS Configuration

QoS is disabled. There is no concept of trusted or untrusted ports because the packets are not modified
(the CoS, DSCP, and IP precedence values in the packet are not changed). Traffic is switched in
pass-through mode (packets are switched without any rewrites and classified as best effort without any
policing).
When QoS is enabled with the mls qos global configuration command and all other QoS settings are at
their defaults, traffic is classified as best effort (the DSCP and CoS value is set to 0) without any policing.
No policy maps are configured. The default port trust state on all ports is untrusted. The default ingress
and egress queue settings are described in the
page 37-36

Default Ingress Queue Configuration

Table 37-6
Table 37-6
Feature
Buffer allocation
Bandwidth allocation
Priority queue bandwidth
WTD drop threshold 1
WTD drop threshold 2
1. The bandwidth is equally shared between the queues. SRR sends packets in shared mode only.
2. Queue 2 is the priority queue. SRR services the priority queue for its configured share before servicing the other queue.
Table 37-7
Table 37-7
CoS Value
0–4
5
6, 7
Table 37-8
Table 37-8
DSCP Value
0–39
40–47
48–63
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
37-36
and the
"Default Egress Queue Configuration" section on page
shows the default ingress queue configuration when QoS is enabled.
Default Ingress Queue Configuration
1
2
shows the default CoS input queue threshold map when QoS is enabled.
Default CoS Input Queue Threshold Map
Queue ID–Threshold ID
1–1
2–1
1–1
shows the default DSCP input queue threshold map when QoS is enabled.
Default DSCP Input Queue Threshold Map
Queue ID–Threshold ID
1–1
2–1
1–1
"Default Ingress Queue Configuration" section on
Queue 1
90 percent
4
0
100 percent
100 percent
Chapter 37
Configuring QoS
37-37.
Queue 2
10 percent
4
10
100 percent
100 percent
OL-13270-06

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst blade 3130Catalyst blade 3032

Table of Contents