Monitoring Ip Multicast Routing - Cisco WS-CBS3032-DEL Software Configuration Manual

Monitoring and Maintaining IP Multicast Routing
Table 45-6
Command
show ip pim rp [group-name | group-address]
show ip rpf {source-address | name}
show ip sdr [group | "session-name" | detail]

Monitoring IP Multicast Routing

You can use the privileged EXEC commands in
paths:
Table 45-7
Command
mrinfo [hostname | address] [source-address |
interface]
mstat source [destination] [group]
mtrace source [destination] [group]
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
45-68
Commands for Displaying System and Network Statistics (continued)
Commands for Monitoring IP Multicast Routing
Chapter 45
Purpose
Display the RP routers associated with a
sparse-mode multicast group. This command is
available in all software images.
Display how the switch is doing Reverse-Path
Forwarding (that is, from the unicast routing table,
DVMRP routing table, or static mroutes).
Display the Session Directory Protocol Version 2
cache.
Table 45-7 to monitor IP multicast routers, packets, and
Purpose
Query a multicast router or multilayer switch about
which neighboring multicast devices are peering
with it.
Display IP multicast packet rate and loss
information.
Trace the path from a source to a destination
branch for a multicast distribution tree for a given
group.
Configuring IP Multicast Routing
OL-13270-06