Cisco WS-CBS3032-DEL Software Configuration Manual page 1297

Appendix A Working with the Cisco IOS File System, Configuration Files, and Software Images
Command
Step 3
archive download-sw
/allow-feature-upgrade [/directory]
/overwrite /reload
tftp:[[//location]/directory]/image-name1.tar
[image-name2.tar image-name3.tar
image-name4.tar]
Step 4
archive download-sw [/directory]
/leave-old-sw /reload
tftp:[[//location]/directory]/image-name1.tar
[image-name2.tar image-name3.tar
image-name4.tar]
Step 5
dir flash:
The download algorithm verifies that the image is appropriate for the switch model and that enough
DRAM is present, or it aborts the process and reports an error. If you specify the /overwrite option, the
download algorithm removes the existing image on the flash device whether or not it is the same as the
new one, downloads the new image, and then reloads the software.
Note If the flash device has sufficient space to hold two images and you want to overwrite one of these images
with the same version, you must specify the /overwrite option.
If you specify the /leave-old-sw, the existing files are not removed. If there is not enough space to install
the new image and keep the current running image, the download process stops, and an error message is
displayed.
OL-13270-06
Purpose
(Optional) Download the image files from the TFTP server to the
switch, and overwrite the current image.
• The /allow-feature-upgrade option allows installation of a
software images with different feature sets.
(Optional) The /directory option specifies a directory for the
•
images.
The /overwrite option overwrites the software image in flash
•
memory with the downloaded image.
The /reload option reloads the system after downloading the
•
image unless the configuration has been changed and not been
saved.
For //location, specify the IP address of the TFTP server.
•
For /directory/image-name1.tar [/directory/image-name2.tar
•
image-name3.tar image-name4.tar], specify the directory
(optional) and the images to download. Directory and image
names are case sensitive.
(Optional) Download the images file from the TFTP server to the
switch, and keep the current image.
• (Optional) The /directory option specifies a directory for the
images.
The /leave-old-sw option keeps the old software version after
•
a download.
The /reload option reloads the system after downloading the
•
image unless the configuration has been changed and not been
saved.
For //location, specify the IP address of the TFTP server.
•
For /directory/image-name1.tar [/directory/image-name2.tar
•
image-name3.tar image-name4.tar], specify the directory
(optional) and the images to download. Directory and image
names are case sensitive.
Verify that the image is successfully copied into the flash device.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
Working with Software Images
A-29