Cisco WS-CBS3032-DEL Software Configuration Manual page 843

Chapter 37 Configuring QoS
The switch configures ingress and egress queues on the port according to the settings in
Table
Table 37-2 Traffic Types, Packet Labels, and Queues
1
VoIP
Traffic
DSCP 46
CoS 5
CoS-to-Ingress 4, 5 (queue 2)
Queue Map
CoS-to-Egress 4, 5
Queue Map (queue 1)
1. VoIP = voice over IP
Table 37-3
Ingress Queue
SRR shared
Priority
Table 37-4 Auto-QoS Configuration for the Egress Queues
Egress Queue Queue Number
Priority 1
SRR shared 2
SRR shared 3
SRR shared 4
When you enable auto-QoS by using the auto qos voip cisco-phone, the auto qos voip cisco-softphone,
or the auto qos voip trust interface configuration command, the switch automatically generates a QoS
configuration based on the traffic type and ingress packet label and applies the commands listed in
Table 37-5
OL-13270-06
37-4.
Data VoIP Control Routing Protocol
Traffic Traffic
24, 26 48
3 6
2, 3, 6, 7 (queue 2)
Auto-QoS Configuration for the Ingress Queues
Queue Number
1
2
CoS-to-Queue Map
4, 5
2, 3, 6, 7
0
1
For information about the trusted boundary feature, see the
Ensure Port Security" section on page
to the port.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
STP BPDU Real-Time
Traffic Video Traffic
56 34
7 3
0 (queue 3)
Queue Weight
CoS-to-Queue Map (Bandwidth)
0, 1, 2, 3, 6, 7 70 percent
4, 5 30 percent
Queue (Buffer) Size
Queue Weight for Gigabit-Capable
(Bandwidth) Ports
up to100 percent 25 percent
10 percent 25 percent
60 percent 25 percent
20 percent 25 percent
"Configuring a Trusted Boundary to
39-42.
Configuring Auto-QoS
Table 37-3 and
All Other Traffic
–
–
0, 1, 2, 3, 6, 7(queue 1)
2 (queue 3) 0, 1
(queue 4)
Queue (Buffer)
Size
90 percent
10 percent
Queue (Buffer)
Size for 10/100
Ethernet Ports
15 percent
25 percent
40 percent
20 percent
37-23