Configuring Lldp-Med Tlvs; Configuring Network-Policy Tlv - Cisco WS-CBS3032-DEL Software Configuration Manual

Software guide
Table of Contents

Advertisement

Chapter 28
Configuring LLDP, LLDP-MED, and Wired Location Service

Configuring LLDP-MED TLVs

By default, the switch only sends LLDP packets until it receives LLDP-MED packets from the end
device. It then sends LLDP packets with MED TLVs, as well. When the LLDP-MED entry has been aged
out, it again only sends LLDP packets.
By using the lldp interface configuration command, you can configure the interface not to send the TLVs
listed in
Table 28-2
LLDP-MED TLV
inventory-management
location
network-policy
power-management
Beginning in privileged EXEC mode, follow these steps to enable a TLV on an interface:
Command
Step 1
configure terminal
Step 2
interface interface-id
Step 3
lldp med-tlv-select tlv
Step 4
end
Step 5
copy running-config startup-config
This example shows how to enable a TLV on an interface:
Switch# configure terminal
Switch(config)# interface interface_id
Switch(config-if)# lldp med-tlv-select inventory-management
Switch(config-if)# end

Configuring Network-Policy TLV

Beginning in privileged EXEC mode, follow these steps to create a network-policy profile, configure the
policy attributes, and apply it to an interface.
Command
Step 1
configure terminal
Step 2
network-policy profile profile number
OL-13270-06
Table
28-2.
LLDP-MED TLVs
Purpose
Enter global configuration mode.
Specify the interface on which you are configuring an LLDP-MED
TLV, and enter interface configuration mode.
Specify the TLV to enable.
Return to privileged EXEC mode.
(Optional) Save your entries in the configuration file.
Purpose
Enter global configuration mode.
Specify the network-policy profile number, and enter network-policy
configuration mode. The range is 1 to 4294967295.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
Configuring LLDP, LLDP-MED, and Wired Location Service
Description
LLDP-MED inventory management TLV
LLDP-MED location TLV
LLDP-MED network policy TLV
LLDP-MED power management TLV
28-7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst blade 3130Catalyst blade 3032

Table of Contents