Monitoring And Maintaining The Ip Network - Cisco WS-CBS3032-DEL Software Configuration Manual

Chapter 39 Configuring IP Unicast Routing

Monitoring and Maintaining the IP Network

You can remove all contents of a particular cache, table, or database. You can also display specific
statistics. Use the privileged EXEC commands in
Table 39-17 Commands to Clear IP Routes or Display Route Status
Command
clear ip route {network [mask | *]}
show ip protocols
show ip route [address [mask] [longer-prefixes]] |
[protocol [process-id]]
show ip route summary
show ip route supernets-only
show ip cache
show route-map [map-name]
OL-13270-06
Table 39-17
Purpose
Clear one or more routes from the IP routing table.
Display the parameters and state of the active routing protocol
process.
Display the state of the routing table.
Display the state of the routing table in summary form.
Display supernets.
Display the routing table used to switch IP traffic.
Display all configured route maps or only the one specified.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
Monitoring and Maintaining the IP Network
to clear routes or display status:
39-111