Monitoring Vtp - Cisco WS-CBS3032-DEL Software Configuration Manual

Monitoring VTP

Monitoring VTP
You monitor VTP by displaying VTP configuration information: the domain name, the current VTP
revision, and the number of VLANs. You can also display statistics about the advertisements sent and
received by the switch.
Table 14-3
Table 14-3
Command
show vtp counters
show vtp devices [conflict] Display information about all VTP version 3 devices in the domain.
show vtp interface
[interface-id]
show vtp password
show vtp status
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
14-18
shows the privileged EXEC commands for monitoring VTP activity.
VTP Monitoring Commands
Purpose
Display counters about VTP messages that have been sent and received.
Conflicts are VTP version 3 devices with conflicting primary servers.
The show vtp devices command does not display information when the
switch is in transparent or off mode.
Display VTP status and configuration for all interfaces or the specified
interface.
Display the VTP password. The form of the password displayed depends
on whether or not the hidden keyword was entered and if encryption is
enabled on the switch.
Display the VTP switch configuration information.
Chapter 14 Configuring VTP
OL-13270-06