Acl Logging - Cisco WS-CBS3032-DEL Software Configuration Manual

Software guide
Table of Contents

Advertisement

Chapter 35
Configuring Network Security with ACLs
Table 35-1
Access List Number
400–499
500–599
600–699
700–799
800–899
900–999
1000–1099
1100–1199
1200–1299
1300–1999
2000–2699
In addition to numbered standard and extended ACLs, you can also create standard and extended named
Note
IP ACLs by using the supported numbers. That is, the name of a standard IP ACL can be 1 to 99; the
name of an extended IP ACL can be 100 to 199. The advantage of using named ACLs instead of
numbered lists is that you can delete individual entries from a named list.

ACL Logging

The switch software can provide logging messages about packets permitted or denied by a standard IP
access list. That is, any packet that matches the ACL causes an informational logging message about the
packet to be sent to the console. The level of messages logged to the console is controlled by the logging
console commands controlling the syslog messages.
Note
Because routing is done in hardware and logging is done in software, if a large number of packets match
a permit or deny ACE containing a log keyword, the software might not be able to match the hardware
processing rate, and not all packets will be logged.
The first packet that triggers the ACL causes a logging message right away, and subsequent packets are
collected over 5-minute intervals before they appear or logged. The logging message includes the access
list number, whether the packet was permitted or denied, the source IP address of the packet, and the
number of packets from that source permitted or denied in the prior 5-minute interval.
OL-13270-06
Access List Numbers (continued)
Type
XNS standard access list
XNS extended access list
AppleTalk access list
48-bit MAC address access list
IPX standard access list
IPX extended access list
IPX SAP access list
Extended 48-bit MAC address access list
IPX summary address access list
IP standard access list (expanded range)
IP extended access list (expanded range)
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
Configuring IPv4 ACLs
Supported
No
No
No
No
No
No
No
No
No
Yes
Yes
35-9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst blade 3130Catalyst blade 3032

Table of Contents