Monitoring And Maintaining Ip Multicast Routing; Clearing Caches, Tables, And Databases - Cisco WS-CBS3032-DEL Software Configuration Manual

Software guide
Table of Contents

Advertisement

Monitoring and Maintaining IP Multicast Routing

Command
Step 3
ip dvmrp metric-offset [in | out]
increment
Step 4
end
Step 5
show running-config
Step 6
copy running-config startup-config
To return to the default setting, use the no ip dvmrp metric-offset interface configuration command.
Monitoring and Maintaining IP Multicast Routing
These sections describe how to monitor and maintain IP multicast routing:

Clearing Caches, Tables, and Databases

You can remove all contents of a particular cache, table, or database. Clearing a cache, table, or database
might be necessary when the contents of the particular structure are or suspected to be invalid.
You can use any of the privileged EXEC commands in
and databases:
Table 45-5
Command
clear ip cgmp
clear ip dvmrp route {* | route}
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
45-66
Clearing Caches, Tables, and Databases, page 45-66
Displaying System and Network Statistics, page 45-67
Monitoring IP Multicast Routing, page 45-68
Commands for Clearing Caches, Tables, and Databases
Purpose
Change the metric added to DVMRP routes advertised in incoming
reports.
The keywords have these meanings:
(Optional) in—Specifies that the increment value is added to
incoming DVMRP reports and is reported in mrinfo replies.
(Optional) out—Specifies that the increment value is added to
outgoing DVMRP reports for routes from the DVMRP routing
table.
If neither in nor out is specified, in is the default.
For increment, specify the value that is added to the metric of a DVMRP
router advertised in a report message. The range is 1 to 31.
If the ip dvmrp metric-offset command is not configured on an
interface, the default increment value for incoming routes is 1, and the
default for outgoing routes is 0.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
Table 45-5
Purpose
Clear all group entries the Catalyst switches have
cached.
Delete routes from the DVMRP routing table.
Chapter 45
Configuring IP Multicast Routing
to clear IP multicast caches, tables,
OL-13270-06

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst blade 3130Catalyst blade 3032

Table of Contents