Remote Span - Cisco WS-CBS3032-DEL Software Configuration Manual

Chapter 30 Configuring SPAN and RSPAN
Figure 30-2
Stackwise Plus

Remote SPAN

RSPAN supports source ports, source VLANs, and destination ports on different switches (or different
switch stacks), enabling remote monitoring of multiple switches across your network.
source ports on Switch A and Switch B. The traffic for each RSPAN session is carried over a
user-specified RSPAN VLAN that is dedicated for that RSPAN session in all participating switches. The
RSPAN traffic from the source ports or VLANs is copied into the RSPAN VLAN and forwarded over
trunk ports carrying the RSPAN VLAN to a destination session monitoring the RSPAN VLAN. Each
RSPAN source switch must have either ports or VLANs as RSPAN sources. The destination is always a
physical port, as shown on Switch C in the figure.
OL-13270-06
Example of Local SPAN Configuration on a Switch Stack
Blade switch stack
port
connections
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
Switch 1
1/0/4
Port 4 on switch 1 in the stack Port 4 on switch 1 in the stack Port 4 on switch 1 in the stack
mirrored on port 15 on switch 2 mirrored on port 15 on switch 2 mirrored on port 15 on switch 2
2/0/15
Switch 2
Switch 3
Understanding SPAN and RSPAN
Network
analyzer
Figure 30-3 shows
30-3