Configuring MSDP
Command
Step 1
configure terminal
Step 2
ip msdp ttl-threshold {ip-address | name}
ttl
Step 3
end
Step 4
show running-config
Step 5
copy running-config startup-config
To return to the default setting, use the no ip msdp ttl-threshold {ip-address | name} global
configuration command.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
46-14
Purpose
Enter global configuration mode.
Limit which multicast data is encapsulated in the first SA message to
the specified MSDP peer.
•
For ip-address | name, enter the IP address or name of the MSDP
peer to which the TTL limitation applies.
For ttl, enter the TTL value. The default is 0, which means all
•
multicast data packets are forwarded to the peer until the TTL is
exhausted. The range is 0 to 255.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
Chapter 46
Configuring MSDP
OL-13270-06