Configuring Port-Based Traffic Control
This chapter describes how to configure the port-based traffic control features on the switch. Unless
otherwise noted, the term switch refers to a standalone switch and to a switch stack.
For complete syntax and usage information for the commands used in this chapter, see the command
Note
reference for this release.
This chapter consists of these sections:
•
•
•
•
•
•
Configuring Storm Control
These sections contain this conceptual and configuration information:
•
•
•
OL-13270-06
Configuring Storm Control, page 26-1
Configuring Protected Ports, page 26-6
Configuring Port Blocking, page 26-8
Configuring Port Security, page 26-9
Configuring Protocol Storm Protection, page 26-21
Displaying Port-Based Traffic Control Settings, page 26-23
Understanding Storm Control, page 26-2
Default Storm Control Configuration, page 26-3
Configuring Storm Control and Threshold Levels, page 26-3
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
26
C H A P T E R
26-1