Displaying Snmp Status - Cisco WS-CBS3032-DEL Software Configuration Manual

Chapter 33 Configuring SNMP

Displaying SNMP Status

To display SNMP input and output statistics, including the number of illegal community string entries,
errors, and requested variables, use the show snmp privileged EXEC command. You also can use the
other privileged EXEC commands in
the fields in the displays, see the Cisco IOS Configuration Fundamentals Command Reference.
Table 33-6 Commands for Displaying SNMP Information
Feature
show snmp
show snmp engineID [local | remote]
show snmp group
show snmp pending
show snmp sessions
show snmp user
OL-13270-06
Table 33-6
Default Setting
Displays SNMP statistics.
Displays information on the local SNMP engine and all remote engines that have
been configured on the device.
Displays information on each SNMP group on the network.
Displays information on pending SNMP requests.
Displays information on the current SNMP sessions.
Displays information on each SNMP user name in the SNMP users table.
You must use this command to display SNMPv3 configuration information
Note
for auth | noauth | priv mode. This information is not displayed in the show
running-config output.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
to display SNMP information. For information about
Displaying SNMP Status
33-19