Cisco WS-CBS3032-DEL Software Configuration Manual page 1301

Appendix A Working with the Cisco IOS File System, Configuration Files, and Software Images
Command
Step 7
archive download-sw /allow-feature-upgrade
[/directory] /overwrite /reload
tftp:[[//location]/directory]/image-name1.tar
[image-name2.tar image-name3.tar
image-name4.tar]
Step 8
archive download-sw [/directory] /leave-old-sw
/reload
tftp:[[//location]/directory]/image-name1.tar
[image-name2.tar image-name3.tar
image-name4.tar]
Step 9 dir flash:
OL-13270-06
Purpose
(Optional) Download the image files from the FTP server to
the switch, and overwrite the current image.
• The /allow-feature-upgrade option allows installation of
a software image with a different feature set.
(Optional) The /directory option specifies a directory for
•
the images.
The /overwrite option overwrites the software image in
•
flash memory with the downloaded image.
The /reload option reloads the system after downloading
•
the image unless the configuration has been changed and
not been saved.
For //username[:password], specify the username and
•
password; these must be associated with an account on the
FTP server. For more information, see the
Download or Upload an Image File By Using FTP"
section on page
For @location, specify the IP address of the FTP server.
•
For /directory/image-name1.tar
•
[/directory/image-name2.tar image-name3.tar
image-name4.tar], specify the directory (optional) and the
images to download. Directory and image names are case
sensitive.
(Optional) Download the image files from the FTP server to
the switch, and keep the current image.
• (Optional) The /directory option specifies a directory for
the images.
• The /leave-old-sw option keeps the old software version
after a download.
The /reload option reloads the system after downloading
•
the image unless the configuration has been changed and
not been saved.
For //username[:password], specify the username and
•
password. These must be associated with an account on
the FTP server. For more information, see the
to Download or Upload an Image File By Using FTP"
section on page
• For @location, specify the IP address of the FTP server.
• For directory/image-name.tar, specify the directory and
the image to download. Directory and image names are
case sensitive.
Verify that the image is successfully copied into the flash
device.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
Working with Software Images
A-31.
A-31.
"Preparing to
"Preparing
A-33