Default Standard Qos Configuration; Default Ingress Queue Configuration - Cisco WS-C3560-48PS-S Software Configuration Manual

Software configuration guide
Hide thumbs Also See for WS-C3560-48PS-S:
Table of Contents

Advertisement

Chapter 28
Configuring QoS

Default Standard QoS Configuration

QoS is disabled. There is no concept of trusted or untrusted ports because the packets are not modified
(the CoS, DSCP, and IP precedence values in the packet are not changed). Traffic is switched in
pass-through mode (packets are switched without any rewrites and classified as best effort without any
policing).
When QoS is enabled with the mls qos global configuration command and all other QoS settings are at
their defaults, traffic is classified as best effort (the DSCP and CoS value is set to 0) without any policing.
No policy maps are configured. The default port trust state on all ports is untrusted. The default ingress
and egress queue settings are described in the
page 28-27

Default Ingress Queue Configuration

Table 28-6
Table 28-6 Default Ingress Queue Configuration
Feature
Buffer Allocation
Bandwidth Allocation
Priority Queue Bandwidth
WTD Drop Threshold 1
WTD Drop Threshold 2
1. The bandwidth is equally shared between the queues. SRR sends packets in shared mode only.
2. Queue 2 is the priority queue. SRR services the priority queue for its configured share before servicing the other queue.
Table 28-7
Table 28-7 Default CoS Input Queue Threshold Map
CoS Value
Queue ID - Threshold ID
Table 28-8
Table 28-8 Default DSCP Input Queue Threshold Map
DSCP Value
Queue ID - Threshold ID
78-16156-01
and the
"Default Egress Queue Configuration" section on page
shows the default ingress queue configuration when QoS is enabled.
1
2
shows the default CoS input queue threshold map when QoS is enabled.
0–4
1 - 1
shows the default DSCP input queue threshold map when QoS is enabled.
0–39
1 - 1
"Default Ingress Queue Configuration" section on
Queue 1
90 percent
4
0
100 percent
100 percent
5
6, 7
2 - 1
1 - 1
40–47
48–63
2 - 1
1 - 1
Catalyst 3560 Switch Software Configuration Guide
Configuring Standard QoS
28-28.
Queue 2
10 percent
4
10
100 percent
100 percent
28-27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents