Deleting Files; Creating, Displaying, And Extracting Files - Cisco WS-CBS3032-DEL Software Configuration Manual

Working with the Flash File System
Some invalid combinations of source and destination exist. Specifically, you cannot copy these
combinations:
•
•
•
For specific examples of using the copy command with configuration files, see the
Configuration Files" section on page
To copy software images either by downloading a new version or by uploading the existing one, use the
archive download-sw or the archive upload-sw privileged EXEC command. For more information, see
the

Deleting Files

When you no longer need a file on a flash memory device, you can permanently delete it. To delete a file
or directory from a specified flash device, use the delete [/force] [/recursive] [filesystem:]/file-url
privileged EXEC command.
Use the /recursive keyword for deleting a directory and all subdirectories and the files contained in it.
Use the /force keyword to suppress the prompting that confirms a deletion of each file in the directory.
You are prompted only once at the beginning of this deletion process. Use the /force and /recursive
keywords for deleting old software images that were installed by using the archive download-sw
command but are no longer needed.
If you omit the filesystem: option, the switch uses the default device specified by the cd command. For
file-url, you specify the path (directory) and the name of the file to be deleted.
When you attempt to delete any files, the system prompts you to confirm the deletion.
When files are deleted, their contents cannot be recovered.
Caution
This example shows how to delete the file myconfig from the default flash memory device:
Switch# delete myconfig

Creating, Displaying, and Extracting Files

You can create a file and write files into it, list the files in a file, and extract the files from a file as
described in the next sections.
Instead of using the copy privileged EXEC command or the archive privileged EXEC command, we
Note
recommend using the archive download-sw and archive upload-sw privileged EXEC commands to
download and upload software image files. For switch stacks, the archive download-sw and archive
upload-sw privileged EXEC commands can only be used through the stack master. Software images
downloaded to the stack master are automatically downloaded to the rest of the stack members.
To upgrade a switch with an incompatible software image, use the archive copy-sw privileged EXEC
command to copy the software image from an existing stack member to the incompatible switch. That
switch automatically reloads and joins the stack as a fully functioning member.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
A-6
Appendix A
From a running configuration to a running configuration
From a startup configuration to a startup configuration
From a device to the same device (for example, the copy flash: flash: command is invalid)
"Working with Software Images" section on page
Working with the Cisco IOS File System, Configuration Files, and Software Images
A-9.
A-25.
"Working with
OL-13270-06