Cisco WS-CBS3032-DEL Software Configuration Manual page 1043

Chapter 39 Configuring IP Unicast Routing
Command
Step 9
match interface type number [...type number]
Step 10
match ip route-source {access-list-number |
access-list-name} [...access-list-number |
...access-list-name]
Step 11
match route-type {local | internal | external [type-1 |
type-2]}
Step 12
set dampening halflife reuse suppress
max-suppress-time
Step 13
set local-preference value
Step 14 set origin {igp | egp as | incomplete}
Step 15 set as-path {tag | prepend as-path-string}
Step 16 set level {level-1 | level-2 | level-1-2 | stub-area |
backbone}
Step 17 set metric metric value
Step 18 set metric bandwidth delay reliability loading mtu
Step 19 set metric-type {type-1 | type-2}
Step 20 set metric-type internal
OL-13270-06
Purpose
Match the specified next-hop route out one of the
specified interfaces.
Match the address specified by the specified advertised
access lists.
Match the specified route-type:
• local—Locally generated BGP routes.
• internal—OSPF intra-area and interarea routes or
EIGRP internal routes.
• external—OSPF external routes (Type 1 or Type 2)
or EIGRP external routes.
Set BGP route dampening factors.
Assign a value to a local BGP path.
Set the BGP origin code.
Modify the BGP autonomous system path.
Set the level for routes that are advertised into the
specified area of the routing domain. The stub-area and
backbone are OSPF NSSA and backbone areas.
Set the metric value to give the redistributed routes (only
for EIGRP). The metric value is an integer
from –294967295 to 294967295.
Set the metric value to give the redistributed routes (only
for EIGRP):
bandwidth—Metric value or IGRP bandwidth of the
•
route in Kb/s in the range 0 to 4294967295
delay—Route delay in tens of microseconds in the
•
range 0 to 4294967295.
reliability—Likelihood of successful packet
•
transmission expressed as a number between 0 and
255, where 255 means 100 percent reliability, and 0
means no reliability.
loading— Effective bandwidth of the route expressed
•
as a number from 0 to 255 (255 is 100 percent
loading).
mtu—Minimum maximum transmission unit (MTU)
•
size of the route in bytes in the range 0 to
4294967295.
Set the OSPF external metric type for redistributed routes.
Set the multi-exit discriminator (MED) value on prefixes
advertised to an external BGP neighbor to match the IGP
metric of the next hop.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
Configuring Protocol-Independent Features
39-101