User Interface For Vrf-Aware Radius; Configuring Multicast Vrfs - Cisco WS-CBS3032-DEL Software Configuration Manual

Configuring Multi-VRF CE
To specify an interface IP address as the source address for TFTP connections, use the ip tftp
source-interface show mode command. To return to the default, use the no form of this command.
Command
Step 1 configure terminal
Step 2
ip tftp source-interface interface-type
interface-number
Step 3
end

User Interface for VRF-Aware RADIUS

To configure VRF-Aware RADIUS, you must first enable AAA on a RADIUS server. The switch
supports the ip vrf forwarding vrf-name server-group configuration and the ip radius source-interface
global configuration commands, as described in the Per VRF AAA Feature Guide at this URL:
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t13/feature/guide/ftvrfaaa.html

Configuring Multicast VRFs

Beginning in privileged EXEC mode, follow these steps to configure a multicast within a VRF table. For
complete syntax and usage information for the commands, see the switch command reference for this
release and the Cisco IOS Switching Services Command Reference, Release 12.2.
Command
Step 1
configure terminal
Step 2 ip routing
Step 3 ip vrf vrf-name
Step 4 rd route-distinguisher
Step 5 route-target {export | import | both}
route-target-ext-community
Step 6
import map route-map
Step 7 ip multicast-routing vrf vrf-name
distributed
Step 8 interface interface-id
Step 9 ip vrf forwarding vrf-name
Step 10 ip address ip-address mask
Step 11 ip pim sparse-dense mode
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
39-88
Purpose
Enter global configuration mode.
Specify the source IP address for TFTP connections.
Return to privileged EXEC mode.
Purpose
Enter global configuration mode.
Enable IP routing mode.
Name the VRF, and enter VRF configuration mode.
Create a VRF table by specifying a route distinguisher. Enter either an
autonomous-system number and an arbitrary number (nnn:y) or an IP
address and an arbitrary number (A.B.C.D:y)
Create a list of import, export, or import and export route target
communities for the specified VRF. Enter either an autonomous-system
number and an arbitrary number (nnn:y) or an IP address and an
arbitrary number (A.B.C.D:y). The route-target-ext-community should
be the same as the route-distinguisher entered in Step 4.
(Optional) Associate a route map with the VRF.
(Optional) Enable global multicast routing for VRF table.
Specify the Layer 3 interface to be associated with the VRF, and enter
interface configuration mode. The interface can be a routed port or an
SVI.
Associate the VRF with the Layer 3 interface.
Configure the IP address for the Layer 3 interface.
Enable PIM on the VRF-associated Layer 3 interface.
Chapter 39 Configuring IP Unicast Routing
OL-13270-06