Procedure With Password Recovery Enabled - Cisco WS-CBS3032-DEL Software Configuration Manual

Chapter 48 Troubleshooting
Proceed with reload? [confirm] y
On a stacking-capable switch:
Switch> reload
slot <stack-master-member-number>
Proceed with reload? [confirm] y
For stacking-capable switches, power on the rest of the switch stack.
Step 6

Procedure with Password Recovery Enabled

If the password-recovery mechanism is enabled, this message appears:
The system has been interrupted prior to initializing the flash file system. The following
commands will initialize the flash file system, and finish loading the operating system
software:
flash_init
load_helper
boot
Initialize the flash file system:
Step 1
switch: flash_init
If you had set the console port speed to anything other than 9600, it has been reset to that particular
Step 2
speed. Change the emulation software line speed to match that of the switch console port.
Load any helper files:
Step 3
switch: load_helper
Display the contents of flash memory:
Step 4
switch: dir flash:
The switch file system appears:
Directory of flash:
10
16128000 bytes total (10003456 bytes free)
Rename the configuration file to config.text.old.
Step 5
This file contains the password definition.
switch: rename flash:config.text flash:config.text.old
Boot up the system:
Step 6
switch: boot
OL-13270-06
2 -rwx 5752 Mar 1 1993 00:06:02 +00:00
3 -rwx 24 Mar 1 1993 00:06:02 +00:00
4 -rwx 9995193 Mar 1 1993 00:04:31 +00:00
6 -rwx 1147 Mar 1 1993 00:40:29 +00:00
9 -rwx 1155 Mar 1 1993 23:55:57 +00:00
-rwx 1161 Mar 1 1993 23:56:21 +00:00
8 -rwx 8016 Mar 1 1993 00:00:51 +00:00
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
Recovering from a Lost or Forgotten Password
config.text
private-config.text
cbs31x0-universal-mz.122-40.EX1
FHH105002F6_IPBase.lic
FHH105002F6_IPServ.lic
FHH105002F6_AdvIPServ.lic
vlan.dat
48-5