Displaying The Logging Configuration - Cisco WS-CBS3032-DEL Software Configuration Manual

Displaying the Logging Configuration

Command
Step 4
logging facility facility-type
Step 5
end
Step 6 show running-config
Step 7 copy running-config startup-config
To remove a syslog server, use the no logging host global configuration command, and specify the syslog
server IP address. To disable logging to syslog servers, enter the no logging trap global configuration
command.
Table 32-4
facilities, consult the operator's manual for your UNIX operating system.
Table 32-4
Facility Type Keyword
auth
cron
daemon
kern
local0-7
lpr
mail
news
sys9-14
syslog
user
uucp
Displaying the Logging Configuration
To display the logging configuration and the contents of the log buffer, use the show logging privileged
EXEC command. For information about the fields in this display, see the Cisco IOS Configuration
Fundamentals Command Reference, Release 12. 12.2 from the Cisco.com page under Documentation
> Cisco IOS Software > 12.2 Mainline > Command References.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
32-14
Purpose
Configure the syslog facility. See
facility-type keywords.
The default is local7.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
lists the UNIX system facilities supported by the software. For more information about these
Logging Facility-Type Keywords
Description
Authorization system
Cron facility
System daemon
Kernel
Locally defined messages
Line printer system
Mail system
USENET news
System use
System log
User process
UNIX-to-UNIX copy system
Chapter 32 Configuring System Message Logging
Table 32-4 on page 32-14 for
OL-13270-06