Cisco WS-CBS3032-DEL Software Configuration Manual page 914

Displaying Standard QoS Information
Table 37-15 Commands for Displaying Standard QoS Information (continued)
Command
show mls qos maps [cos-dscp | cos-input-q |
cos-output-q | dscp-cos | dscp-input-q | dscp-mutation
dscp-mutation-name | dscp-output-q | ip-prec-dscp |
policed-dscp]
show mls qos queue-set [qset-id]
show mls qos vlan vlan-id
show policy-map [policy-map-name [class
class-map-name]]
show running-config | include rewrite
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
37-94
Purpose
Display QoS mapping information.
Display QoS settings for the egress queues.
Display the policy maps attached to the specified SVI.
Display QoS policy maps, which define classification criteria for
incoming traffic.
Do not use the show policy-map interface privileged
Note
EXEC command to display classification information
for incoming traffic. The control-plane and interface
keywords are not supported, and the statistics shown in
the display should be ignored.
Display the DSCP transparency setting.
Chapter 37 Configuring QoS
OL-13270-06