Cisco WS-CBS3032-DEL Software Configuration Manual page 1262

Troubleshooting CPU Utilization
This example shows normal CPU utilization. The output shows that utilization for the last 5 seconds is
8%/0%, which has this meaning:
•
•
\
Table 48-5 Troubleshooting CPU Utilization Problems
Type of Problem
Interrupt percentage value is almost
as high as total CPU utilization value.
Total CPU utilization is greater than
50% with minimal time spent on
interrupts.
For complete information about CPU utilization and how to troubleshoot utilization problems, see the
Troubleshooting High CPU Utilization
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
48-26
The total CPU utilization is 8 percent, including both time running Cisco IOS processes and time
spent handling interrupts
The time spent handling interrupts is zero percent.
Cause
The CPU is receiving too many packets
from the network.
One or more Cisco IOS process is
consuming too much CPU time. This is
usually triggered by an event that activated
the process.
Corrective Action
Determine the source of the network
packet. Stop the flow, or change the
switch configuration. See the section on
"Analyzing Network Traffic."
Identify the unusual event, and
troubleshoot the root cause. See the
section on
Processes."
document on Cisco.com.
Chapter 48 Troubleshooting
"Debugging Active
OL-13270-06