Configuring 802.1X Authentication - Cisco WS-CBS3032-DEL Software Configuration Manual

Chapter 9 Configuring IEEE 802.1x Port-Based Authentication
This example shows how the session ID appears in the output of the show authentication command. The
session ID in this example is 160000050000000B288508E5:
Switch# show authentication sessions
Interface
Fa4/0/4
This is an example of how the session ID appears in the syslog output. The session ID in this example
is also160000050000000B288508E5:
1w0d: %AUTHMGR-5-START: Starting 'mab' for client (0000.0000.0203) on Interface Fa4/0/4
AuditSessionID 160000050000000B288508E5
1w0d: %MAB-5-SUCCESS: Authentication successful for client (0000.0000.0203) on Interface
Fa4/0/4 AuditSessionID 160000050000000B288508E5
1w0d: %AUTHMGR-7-RESULT: Authentication result 'success' from 'mab' for client
(0000.0000.0203) on Interface Fa4/0/4 AuditSessionID 160000050000000B288508E5
The session ID is used by the NAD, the AAA server, and other report-analyzing applications to identify
the client. The ID appears automatically. No configuration is required.

Configuring 802.1x Authentication

These sections contain this configuration information:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
OL-13270-06
MAC Address
0000.0000.0203
Default 802.1x Authentication Configuration, page 9-34
802.1x Authentication Configuration Guidelines, page 9-35
Configuring 802.1x Authentication, page 9-38
Configuring 802.1x Readiness Check, page 9-40
Configuring 802.1x Violation Modes, page 9-38
Configuring Voice Aware 802.1x Security, page 9-41
Configuring the Switch-to-RADIUS-Server Communication, page 9-42
Configuring the Host Mode, page 9-44
Configuring Periodic Re-Authentication, page 9-45
Manually Re-Authenticating a Client Connected to a Port, page 9-46
Changing the Quiet Period, page 9-46
Changing the Switch-to-Client Retransmission Time, page 9-46
Setting the Switch-to-Client Frame-Retransmission Number, page 9-47
Setting the Re-Authentication Number, page 9-48
Enabling MAC Move, page
Enabling MAC Replace, page 9-49
Configuring 802.1x Accounting, page 9-50
Configuring a Guest VLAN, page 9-51
Configuring a Restricted VLAN, page 9-52
Configuring the Inaccessible Authentication Bypass Feature, page 9-53
Configuring 802.1x Authentication with WoL, page 9-57
Configuring MAC Authentication Bypass, page 9-57
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
Method Domain Status
mab DATA Authz Success
(required)
(optional)
(optional)
(optional)
(optional)
9-48(optional)
(optional)
(optional)
(optional)
(optional)
Configuring 802.1x Authentication
Session ID
160000050000000B288508E5
(required)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
9-33