Cisco WS-CBS3032-DEL Software Configuration Manual page 1306

Working with Software Images
Command
Step 6
archive download-sw /allow-feature-upgrade
[/directory] /overwrite /reload
tftp:[[//location]/directory]/image-name1.tar
[image-name2.tar image-name3.tar
image-name4.tar]
Step 7
archive download-sw [/directory] /leave-old-sw
/reload
tftp:[[//location]/directory]/image-name1.tar
[image-name2.tar image-name3.tar
image-name4.tar]
Step 8 dir flash:
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
A-38
Appendix A Working with the Cisco IOS File System, Configuration Files, and Software Images
Purpose
Download the images file from the RCP server to the switch
and overwrite the current image.
• The /allow-feature-upgrade allows installation of a
software image with a different feature set.
(Optional) The /directory option specifies a directory
•
for the images.
The /overwrite option overwrites the software image in
•
flash memory with the downloaded image.
The /reload option reloads the system after downloading
•
the image unless the configuration has been changed and
not been saved.
For //username, specify the username. For the RCP copy
•
request to execute successfully, an account must be
defined on the network server for the remote username.
For more information, see the
or Upload an Image File By Using RCP" section on
page
For @location, specify the IP address of the RCP server.
•
For /directory/image-name1.tar
•
[/directory/image-name2.tar image-name3.tar
image-name4.tar], specify the directory (optional) and
the images to download. Directory and image names are
case sensitive.
Download the images file from the RCP server to the switch
and keep the current image.
(Optional) The /directory option specifies a directory
•
for the images.
The /leave-old-sw option keeps the old software version
•
after a download.
The /reload option reloads the system after downloading
•
the image unless the configuration has been changed and
not been saved.
For //username, specify the username. For the RCP copy
•
request to execute, an account must be defined on the
network server for the remote username. For more
information, see the
an Image File By Using RCP" section on page
For @location, specify the IP address of the RCP server.
•
For /directory/image-name1.tar
•
[/directory/image-name2.tar image-name3.tar
image-name4.tar], specify the directory (optional) and
the images to download. Directory and image names are
case sensitive.
Verify that the image is successfully copied into the flash
device.
"Preparing to Download
A-36.
"Preparing to Download or Upload
A-36.
OL-13270-06