Understanding Flex Links And The Mac Address-Table Move Update - Cisco WS-CBS3032-DEL Software Configuration Manual

Configuring Flex Links and the MAC
Address-Table Move Update Feature
This chapter describes how to configure Flex Links, a pair of interfaces on the switch that provide a
mutual backup. It also describes how to configure the MAC address-table move update feature, also
referred to as the Flex Links bidirectional fast convergence feature. Unless otherwise noted, the term
switch refers to a standalone switch and to a switch stack.
For complete syntax and usage information for the commands used in this chapter, see the command
Note
reference for this release.
The chapter consists of these sections:
•
•
•
Understanding Flex Links and the MAC Address-Table Move
Update
This section contains this information:
•
•
•
•
OL-13270-06
Understanding Flex Links and the MAC Address-Table Move Update, page 21-1
Configuring Flex Links and MAC Address-Table Move Update, page 21-7
Monitoring Flex Links and the MAC Address-Table Move Update Information, page 21-14
Flex Links, page 21-2
VLAN Flex Link Load Balancing and Support, page 21-3
Flex Link Multicast Fast Convergence, page 21-3
MAC Address-Table Move Update, page 21-6
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
21
C H A P T E R
21-1