Promoting A Secure Access Device Configuration To A Template - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

Related
Documentation

Promoting a Secure Access Device Configuration to a Template

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Table 6: Template Operations Settings (continued)
Validate
To apply the settings to the device itself, run the Update Device directive to push the
configuration to the device.
Promoting a Secure Access Device Configuration to a Template on page 31
Configuring Secure Access Device User Roles (NSM Procedure) on page 35
Verifying Imported Device Configurations on page 19
NSM allows you to import a Secure Access device configuration and then convert, or
promote, it to a template. You can then use that template to make identical configurations
on other Secure Access devices.
To promote a Secure Access device configuration to a template:
From the Devices workspace in NSM, double-click the Secure Access device whose
1.
configuration settings you want to promote to a template. The Secure Access device
dialog box appears.
Select the Configuration node. The device editor appears.
2.
From the left pane of the device editor, right-click the Configuration node that you
3.
want to promote to a template and select Promote Template. The Select templates
dialog box appears.
Select the template to which you want to apply the configuration settings and click
4.
OK. The Secure Access device configuration is promoted to the selected template.
Verifying Imported Device Configurations on page 19
Creating and Applying a Secure Access Device Template on page 29
Chapter 5: Working with Secure Access Templates
Validates the templates.
31