Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 148

Configuring Secure Access Devices Guide
Table 29: Configuring Telnet/SSH Resource Profile details (continued)
Option Function
Host Specifies the name or IP address of the server to
which this resource profile should connect.
Port Specifies the port on which the Secure Access
device should connect to the server.
Username Specifies the static username to pass the user's
credentials to the server.
Create access Allows you to enable access to the specified server.
control policy
Role Selections tab
Role Selections Allows you to specify the roles to which the
resource profile applies.
Bookmarks tab > General tab
Name Specifies the name of the bookmark.
Description Describes the bookmark.
Font Size Specifies the size of the bookmark.
Screen Size Specifies the size of the server display window.
Screen Buffer Allows the server window to change the number
of rows to display during scrolling.
Roles Specifies the roles to which you want to display the
bookmark.
Bookmarks tab > Role Selections
Role Selections Allows you to specify the roles for which to display
a bookmark.
NOTE: The Role Selections tab is enabled only
when you select Selected Roles option from the
Applies to roles drop-down list.
130
Your Action
Enter the name or IP address.
Enter the port or scroll to one.
Enter the static username. For example enter
<username> or another Secure Access
device-appropriate session variable.
Select the Create an access control policy check
box to enable this feature.
Select the role and, then click Add .
Enter the name.
Enter the description.
Enter a size from 8 to 36 pixels or scroll to the
required number. (By default, the Secure Access
device sets the font size to 12.)
Select a size from the drop-down list.
Enter the value in the Screen Buffer box (By
default, the Secure Access device sets the buffer
at 100 rows.)
Select one of the following option:
All Available roles—Displays the bookmark to
all of the roles associated with the resource
profile.
Selected Roles—Displays the bookmark to a
subset of the roles associated with the resource
profile.
Select the role, and then click Add.
Copyright © 2010, Juniper Networks, Inc.