Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 250

Configuring Secure Access Devices Guide
Related
Documentation
232
Cancel—Cancels the modifications.
Table 63: Host Checker Options Configuration Details
Option Function
Perform check Specifies the interval at which you want the
every (minutes) Host Checker to perform policy evaluation on
a client machine.
Client-side Specifies an interval to control timing out in
process, login the following situations:
inactivity timeout
If the user navigates away from the Secure
(minutes)
Access device sign-in page after Host
Checker starts running but before signing in
to the Secure Access device, Host Checker
continues to run on the user's machine for
the interval you specify.
If the user is downloading Host Checker over
a slow connection, increase the interval to
allow enough time for the download to
complete.
Auto-upgrade Secure Access device automatically
Host Checker downloads the Host Checker application to a
client computer when the version of Host
Checker on the Secure Access device is newer
than the version installed on the client.
Perform dynamic Secure Access device automatically refreshes
policy the roles of individual users by enabling
reevaluation dynamic policy evaluation for Host Checker.
Configuring General Host Checker Remediation (NSM Procedure) on page 233
Configuring Host Checker Third-Party Applications Using Predefined Rules (NSM
Procedure) on page 234
Your Action
Enter the interval in
minutes.
NOTE: If you enter a value
of zero, Host Checker runs
only on the client machine
when the user first signs
into the Secure Access
device.
Enter the interval in
minutes.
Select the Auto-upgrade
Host Checker to enable this
feature.
Select the Perform
dynamic policy
reevaluation to enable this
feature.
Copyright © 2010, Juniper Networks, Inc.