Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 71

Copyright © 2010, Juniper Networks, Inc.
Chapter 7: Configuring Terminal Services Using Remote Access Mechanism
Table 12: User Role Terminal Services Configuration Details (continued)
Option
Type
Terminal Services > Terminal Services Sessions tab > Type > Windows Terminal Services
> Settings tab
Username
Password Type
Variable Password
Explicit Password
Function
Allows you to specify the type
of user session you want to
create.
Specifies the username that
the Secure Access device
should pass to the terminal
server.
Allows you to specify a static
password or select a variable
password if you want to use
the password stored in the
Secure Access device's
primary or secondary
authentication server.
Specifies the SSO variable
password that the Secure
Access device uses to validate
sign-in credentials.
Specifies the explicit SSO
password that the Secure
Access device uses to validate
sign-in credentials.
Your Action
Select one of the following
session type:
Windows Terminal
Services—Enables a
terminal session to a
Windows Terminal Server.
Citrix using default
ICA—Enables a terminal
services session to a Citrix
Metaframe server.
Citrix using custom ICA
file—Enables a terminal
services session to a Citrix
Metaframe or NFuse server
governing a Citrix server
farm.
You can enter a static
username or a variable.
NOTE: Enter the <username>
variable to pass the username
stored in the Secure Access
device's primary authentication
server. Or use the following
syntax to submit the username
for the secondary
authentication server:
<username@Secondary
ServerName> or
<username[2]>.
Select either Variable
Password or Explicit
Password.
Enter the variable password.
Enter the explicit password.
53