Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 215

Configuring secure access devices guide
Hide thumbs Also See for NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01:
Table of Contents

Advertisement

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Table 51: Secure Access Authentication Realms Configuration
Details (continued)
Option
Function
Password for
Specifies the password for the
Secondary Auth
secondary authentication server.
Predefined
Specifies the predefined password.
Password
Enable Dynamic
Uses dynamic policy evaluation for
policy evaluation
this realm.
Refresh roles
Refreshes the roles of all users in
this realm. (This option does not
control the scope of the Refresh
Now button.)
Refresh policies
Refreshes the resource policies (not
including Meeting and Email Client)
for all users in this realm. (This
option does not control the scope
of the Refresh Now button.)
Refresh interval
Specifiesy how often you want the
(minutes)
Secure Access device to perform
an automatic policy evaluation of
all currently signed-in realm users.
Configuring Secure Access Authentication Policies (NSM Procedure) on page 198
Configuring Secure Access Role Mapping Rules (NSM Procedure) on page 203
Configuring Secure Access Sign-In Policies (NSM Procedure) on page 207
Chapter 12: Configuring Authentication Realms
Your Action
Select the mode of submission of
password to the secondary
authentication server from the
drop-down list:
Username is specified by user on
sign-in page—Prompts the user
to manually submit his password
to the secondary server during the
Secure Access device sign-in
process.
Predefined user name
template—Automatically submits
a password to the secondary
server during the Secure Access
device sign-in process.
Enter static text or a valid variable.
Select General > Enable Dynamic
policy evaluation to enable an
automatic timer for dynamic policy
evaluation of this realm's
authentication policy, role mapping
rules, and role restrictions.
Select General > Refresh roles to
enable this option.
Select General > Refresh policies to
enable this option.
Ener the number of minutes (5 to
1440).
197

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network and security manager

Table of Contents