Configuring A Secure Access Manual Ca Certificate (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

Related
Documentation

Configuring a Secure Access Manual CA Certificate (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
Select Certificate Server from the Auto Server Type list.
6.
Configure the server using the settings described in Table 46 on page 185.
7.
Click one:
8.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 46: Secure Access Certificate Configuration Details
Option Function
Certificate Settings
User Name Specifies how the Secure Access device
Template should construct a username.
Server Catalog > Expressions tab
Name Specifies a name for the user expression
in the certificate server user directory.
Value Specifies a value for the user expression
in the certificate server user directory.
Configuring a Secure Access SAML Server Instance (NSM Procedure) on page 188
Configuring a Secure Access Active Directory or NT Domain Instance (NSM Procedure)
on page 190
Configuring a Secure Access eTrust SiteMinder Server Instance (NSM Procedure) on
page 174
To manually upload CA certificates to the Secure Access device:
In the NSM navigation tree, select Device Manager > Devices. Click the Device Tree
1.
tab, and then double-click the Secure Access device for which you want to manually
upload CA certificates.
Click the Configuration tab, and then select System > Configuration > Certificates
2.
> Trusted Client CAs tab.
Click Trusted Client CA . The New Trusted Client CA page appears.
3.
Configure the server using the settings described in Table 47 on page 186.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Chapter 11: Configuring Authentication and Directory Servers
Your Action
Enter any combination of
certificate variables contained
in angle brackets and plain text.
Enter a name.
Enter a value.
185