Creating User Or Administrator Urls - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

Creating User or Administrator URLs

Copyright © 2010, Juniper Networks, Inc.
Table 54: Authorization-Only Policy Configuration Details (continued)
Option Function
Allow Enables or disables only the
ActiveSync ActiveSync requests.
Traffic only
To configure a user or administrator URL:
In the NSM navigation tree, select Device Manager > Devices. Click the Device Tree
1.
tab, and then double-click the Secure Access device for which you want to configure
a user/administrator URL.
Click the Configuration tab, and select Authentication > Signing In > Sign-in Policies
2.
> User/Administrator URLs. The corresponding workspace appears.
Add or modify settings on the user/administrator URL as specified in Table 55 on
3.
page 209.
Click one:
4.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 55: User/Administrator URLs Configuration Details
Option Function
General tab
Sign-in URL Specifies the sign-in URL.
Description Specifies the description of the
user/administrator URL policy.
Enable Enables or disables the individual
policy.
Sign-in Page Specifies the customized properties in
the end-user's welcome page such as
the welcome text, help text, logo,
header, and footer.
Realm Select Specifies the type of the realm that
you want to choose.
Chapter 13: Configuring Sign-in Policies and Sign-in Pages
Your Action
Select Allow ActiveSync Traffic only to perform
a basic validation of the HTTP header to ensure
the request is consistent with the ActiveSync
protocol. If you select this option, only ActiveSync
protocol requests can be processed. If validation
fails, a message is created in the user's event log.
If you do not select this option, both ActiveSync
and non-ActiveSync requests are processed.
Your Action
Enter a valid URL for the sign-in
URL.
Enter a description for the
user/administrator URL policy.
Select User/Administrator URLs
> Enable to enable this option.
Select the sign-in page from the
drop-down list.
Select the realm select from the
drop-down list.
209