Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 91

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Table 16: User Role Network Connect Configuration Details (continued)
Option
Windows: Session start script
location
Windows: Session end script
location
Skip if GINA Enabled
Linux: Session start script
location
Linux: Session end script
location
Mac: Session start script
location
Mac: Session end script
location
Configuring Secure Application Manager on a Secure Access Device User Role (NSM
Procedure) on page 74
Configuring Secure Meeting on a Secure Access Device User Role (NSM Procedure)
on page 79
Chapter 8: Configuring Access Options using Remote Access Mechanisms
Function
Specifies the location of
Network Connect start scripts
for Windows.
Specifies the location of
Network Connect end scripts
for Windows.
Bypasses the specified
Windows session start script.
The sign-in script may be
identical to the specified
Network Connect start script.
This feature avoids executing
the same script twice.
Specifies the location of
Network Connect start scripts
for Linux.
Specifies the location of
Network Connect end scripts
for Linux.
Specifies the location of
Network Connect start scripts
for Macintosh.
Specifies the location of
Network Connect end scripts
for Macintosh.
Your Action
Enter the start script location.
Enter the end script location.
Select the Skip if GINA
enabled check box to enable
this feature.
Enter the start script location.
Enter the end script location.
Enter the start script location.
Enter the end script location.
73