Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 180

Configuring Secure Access Devices Guide
162
To configure an ACE server instance:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Secure Access device for which
2.
you want to configure an ACE server instance.
Click the Configuration tab and select Authentication > Auth Servers. The
3.
corresponding workspace appears.
NOTE: If you want to update an existing server instance, click the
appropriate link in the Auth Server Name box and perform the Steps 5
through 8.
Click the New button. The New dialog box appears.
4.
Specify a name to identify the server instance.
5.
Select ACE Server from the Auth Server Type list.
6.
Configure the server using the settings described in Table 40 on page 162.
7.
Click one:
8.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 40: Secure Access ACE Server Instance Configuration Details
Option Function
ACE Settings
ACE Port Specifies the port of the ACE server.
Config File Specifies the RSA ACE/agent
Name configuration file.
Imported on Specifies the importing information.
Import Config Specifies the configuration file for
File importing.
Server Catalog > Expressions tab
name Allows you to enter a name for the
user expression in the ACE server
user directory.
Your Action
Select a default port number.
NOTE: The Secure Access device uses
only this setting if no port is specified in
the sdconf.rec file.
Enter the name of the config file.
NOTE: You must update this file on the
device anytime you make changes to
the source file.
Automatically pops up the imported on
information and it is not editable.
Select the configuration file for
importing using the browse button.
Enter the name.
Copyright © 2010, Juniper Networks, Inc.