Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 124

Configuring Secure Access Devices Guide
106
Table 24: Citrix Listed Application Resource Profile Configuration
Details (continued)
Option
Citrix XML Service IP and Port
Use SSL for connecting to
Citrix XML Service
XML Username
XML Password Type
Variable Password
XML Password
XML Domain
Citrix Listed Applications > Autopolicy: Terminal Services Access Control > Rules tab
Function
Specifies the IP address and port
of the Citrix MetaFrame server
where the XML service is
running.
Sends the password through
SSL instead of cleartext.
Specifies the username for
connecting to the Citrix
Metaframe server where the
XML service is running.
Specifies static password or
variable password.
Specifies the variable
credentials.
NOTE: This field is enabled only
when you select Variable
Password from the XML
Password Type drop–down list.
Specifies the XML password.
NOTE: This field is enabled only
when you select XML Password
from the XML Password Type
drop– down list.
Specifies the domain name for
connecting to the Citrix
Metaframe server where the
XML service is running.
Copyright © 2010, Juniper Networks, Inc.
Your Action
Enter the IP address and port
of the Citrix MetaFrame
server.
NOTE:
You do not need to enter
the port number if you are
using the default value.
The default port is 80 (if
SSL is selected, the
default port is 443).
You can enter more than
one server. If the
connection fails on one
server, the next server in
the list is used.
Select the Use SSL for
connecting to Citrix XML
Service check box to enable
this feature.
Enter the username for
connecting to the Citrix
Metaframe server.
Select either Variable
Password or Password from
the drop-down list.
Enter the variable credential
such as <USERNAME>
and<PASSWORD>.
Enter the XML password.
Enter the domain name.