Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 196

Configuring Secure Access Devices Guide
178
Table 44: Secure Access eTrust SiteMinder Configuration
Details (continued)
Option
Authentication Type > Custom
Agent
Authentication Type > Form
POST
Form POST Target
Form POST Protocol
Form POST Webagent
Function
Authenticates using the
Secure Access device custom
Web agent.
Posts user credentials to a
standard Web agent that you
have already configured rather
than contacting the SiteMinder
policy server directly.
Specifies the target URL.
NOTE: The form post target,
form post protocol, form post
Webagent, form post port,
form post path, and form post
parameters field are displayed
only when you select Form
POST option from the
Authentication type drop
down list.
Allows you to specify the
protocol for communication
between IVE and the specified
Web agent.
NOTE: This field is displayed
only when you select the Form
POST option from the
Authentication Type
drop-down list.
Specifies the name of the Web
agent from which the Secure
Access device is to obtain
SMSESSION cookies.
NOTE: This field is displayed
only when you select Form
POST option from the
Authentication Type
drop-down list.
Copyright © 2010, Juniper Networks, Inc.
Your Action
Select Siteminder Settings >
Authentication >
Authentication Type >
Custom Agent option from the
Authentication Type
drop-down list.
Select Siteminder Settings >
Authentication >
Authentication Type > Form
POST option from the
Authentication Type
drop-down list to allow the
Web agent to contact the
policy server to determine the
appropriate sign-in page to
display to the user.
Enter the target URL.
Select the protocol from the
drop-down list:
HTTP—For non secure
communication.
HTTPS—For secure
communication.
Enter the name of the web
agent.