Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 101

Copyright © 2010, Juniper Networks, Inc.
Table 18: User Role Secure Meeting Configuration Details (continued)
Option
Password Management
Remote Control
Meetings > Options > Meeting Policy Settings tab
Limit number of simultaneous
meetings
Limit number of simultaneous
meeting attendees
Limit duration of meetings
(minutes)
Meetings > Auth Servers
All Authentication Servers
Auth Servers with Access
Priviledge
Chapter 8: Configuring Access Options using Remote Access Mechanisms
Function
Allows you to prompt user to
renew password after specific
number of meetings.
Specifies whether you want to
allow meeting presenters to
share control of their desktops
and applications with other
meeting attendees.
Allows you to specify the
maximum number of meetings
that may be held by at any
given time by members of the
role.
Allows you to specify the
maximum number of people
who may simultaneously
attend meetings scheduled by
members of the role.
Allows you to specify a
maximum duration (in
minutes) that a meeting may
run.
Exports all authentication
servers or selected
authentication servers.
Specifies whether the
members of this role may
access and search the
authentication servers that
they are currently
authenticated against.
Your Action
Enter the number.
NOTE: Enter <-1> to not renew
the meeting password.
Select one of the following
options from drop-down list:
Allow remote control of
shared windows (more
functional)—Allows the
meeting presenter or
conductor to pass control of
the presenter's desktop and
desktop applications to any
of the meeting attendees,
including non-Secure
Access device users.
Disable remote control
(more secure)—Allows
Limited control of the
meeting presenter's desktop
and desktop applications
exclusively to the presenter.
Select the Limit number of
simultaneous meetings check
box to enable this feature.
Select the Limit number of
simultaneous meeting
attendees check box to enable
this feature.
Select the Limit duration of
meetings (minutes) to enable
this feature.
Select the ALL Authentication
Servers check box to enable
this feature.
Select the authentication
server and click Add.
83