Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 120

Configuring Secure Access Devices Guide
102
Table 23: Citrix Terminal Services (Default ICA) Configuration
Details (continued)
Option
Password Type
Variable Password
Explicit Password
Path to application
Working directory
Auto-launch
Connect drives
Function
Allows you to select static either
a password or a variable
password that the Secure
Access device should pass to
the terminal server.
Specifies the variable password.
Specifies the explicit password.
Specifies where the
application's executable file
resides on the terminal server.
Specifies where the terminal
server should place working files
for the application.
Allows you to automatically
launch this Terminal Service
session bookmark when users
sign into the Secure Access
device.
Allows you to connect the user's
local drive to the terminal server,
enabling the user to copy
information from the terminal
server to his local client
directories.
Copyright © 2010, Juniper Networks, Inc.
Your Action
Select one of the following
options from the Password
Type drop-down list:
Variable Password—Uses
the password stored in the
Secure Access device's
primary or secondary
authentication server.
Password—Allows you to
specify a password.
Enter the <password>
variable. Or use the following
syntax to submit the
password for the secondary
authentication server:
<P assword@SecondaryServerName>
or <Password[2]>.
Enter the explicit password.
Enter the path.
For example, you might enter
the following directory for
the Microsoft Word
C:\Program
application:
Files\Microsoft
Office\Office10\WinWord.exe
Enter the path.
For example, you might
specify that Microsoft Word
should save files to the
following directory by
C:\Documents and
default:
Settings\username\My
Documents
Select the Auto-launch
check box to enable this
feature.
Select the Connect drives
check box to enable this
feature.