Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 140

Configuring Secure Access Devices Guide
122
Table 27: Configuring File Rewriting Resource Profiles Details (continued)
Option Function
New Specifies the resource policy to
Resources which this policy applies.
Action Specifies the type of credentials
to pass to the Windows share or
directory.
Username Specifies a username to submit to
the Windows share or directory.
Variable Specifies a variable password to
Password the Windows share or directory.
Password Specifies a static password to the
Windows share or directory.
Bookmarks
Name Specifies the name of the
bookmark.
Description Describes the bookmark.
Server Specifies the server name.
Share Specifies the share name.
Your Action
Enter the resource using the format:
\\server[\share[\path]].
Select one of the following options:
Use Specified Credentials(Variable
Password)...—Secure Access device uses
specified credentials with variable
password to pass to the Windows share
or directory.
Use Specified Credentials(Fixed
Password)...—Secure Access device uses
specified credentials with fixed password
to pass to the Windows share or directory.
Prompt for user credentials—Secure
Access device intermediates the share
challenge by presenting an authentication
challenge in the Secure Access device the
first time a user attempts to access the
share. The user enters the credentials and
the credentials are stored in the Secure
Access device. If the credentials later fail,
the Secure Access device again prompts
the user for the credentials.
Enter a variable. For example,
<USERNAME> or a static username. For
example enter administrator to submit to
the Windows share or directory.
NOTE: When entering a variable, you may
also include a domain. For example,
yourcompany.net\<USERNAME>
Enter the variable password.
Enter the static password.
Enter a name.
Enter the description.
Enter the server name.
Enter the share name.
Copyright © 2010, Juniper Networks, Inc.