Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 274

Configuring Secure Access Devices Guide
Related
Documentation
256
Click the Configuration tab and select Users > Resource Policies > Select Resource
3.
> Select Policy > Detailed Rules.
Select or create the rule and configure the Cache Cleaner restrictions at the resource
4.
policy level using the settings described in Table 73 on page 256.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 73: Configuring Global Cache Cleaner Restriction Detail at Resource
Policy Level
Option Function
General tab
Name Specifies the resource policy's detailed rule name.
Action Specifies the action to allow the Secure Access
device to access the resource if the user's
machine does not meet the Cache Cleaner
requirement.
Resources Specifies the resource or a partial list of the
resources.
Conditions Specifies a custom expression in a detailed rule
for the Secure Access device to determine
whether or not Cache Cleaner needs to be
installed or running on the user's workstation.
Configuring the Network Communications Protocol (NSM Procedure) on page 257
Configuring Global Cache Cleaner Options (NSM Procedure) on page 251
Your Action
Enter the name.
Select Allow or Deny from
the drop–down list.
Enter specific URL, directory
path, file, or file type.
Enter the custom
expression.
Copyright © 2010, Juniper Networks, Inc.