Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 247

Copyright © 2010, Juniper Networks, Inc.
Table 62: Configuring SAML SSO Artifact Profile Resource Policy
Details (continued)
Opton
Authentication Type
Username
Password
Certificate
Attribute Name
Attribute Value
SAML SSO > Role
Chapter 14: Configuring Single Sign-On
Function
Specifies the authentication
method that the Secure
Access device should use to
authenticate the assertion
consumer service.
Specifies the username that
the assertion consumer
service must send the Secure
Access device.
NOTE: The username and
password boxes are displayed
only when you select the
Username/Password option
from the Authentication Type
drop-down list.
Specifies the password that
the Secure Access device
must send the Secure Access
device.
Specifies the attributes that
the assertion consumer
service must send the Secure
Access device. (one attribute
per line).
NOTE: The
certificates-attributes box is
displayed only when you
select Certificate option from
the Authentication Type
drop-down list.
Specifies the attribute values
that match the values
contained in the assertion
consumer service's certificate.
Your Action
Select one of the following
options from the drop-down
list:
None—Does not
authenticate the assertion
consumer service.
Username/Password—
Authenticates the assertion
consumer service using a
username and password.
Certificate—Authenticates
the assertion consumer
service using certificate
attributes.
Enter the username.
Enter the password.
Enter the attribute name. For
example, enter cn=sales.
Enter the attribute value.
229