Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 153

Table 32: Bookmarks for Virtual Desktop Resource Profile Details (continued)
Options
Screen Size
Color Depth
Connect drives
Connect printers
Connect COM Ports
Applies to roles
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Your Action
Select any value from the drop-down list to set the screen size.
Select any value from the drop-down list to set the color depth.
Select the check box to allow users to access local resources such as drives,
through the terminal session.
Select the check box to allow users to access local resources such as printers
through the terminal session.
Select the check box to allow users to access local resources such as COM ports
through the terminal session.
Specify the roles to which you want to display the session bookmarks, if you are
configuring the session bookmark through the resource profile pages. Select one
of the following options from the drop-down list:
All Virtual Desktops Profile roles—Displays the session bookmark to all of the
roles associated with the resource profile.
Subset of Virtual Desktops Profile roles—Displays the session bookmark to
a subset of the roles associated with the resource profile. Upon selecting this
option, the Role Selections tab is enabled. Select roles from the Members list
and click Add/remove to move them to the Non-members list.
Configuring WSAM Resource Profile (NSM Procedure) on page 131
Configuring a Telnet/SSH Resource Profile (NSM Procedure) on page 129
Chapter 9: Configuring Secure Access Resource Profiles
135