Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 263

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Table 67: Configuring Host Checker Customized Requirements Using
Custom Rules Details (continued)
Option Function
Settings tab
Scan for Configures a policy based on
Specific specific products.
products
Scan for Configures a policy based on
specific specific patches
patches
Configuring Global Cache Cleaner Options (NSM Procedure) on page 251
Configuring a Secure Application Manager Resource Policy (NSM Procedure) on page 144
Chapter 15: Configuring Secure Access Host Checker Policies
Your Action
Select one of the following options from the
drop-down list
Enter the integrity measurement rule
name.
All products—Host Checker checks for all
of the exposed patches on the endpoint.
Specific products—An extensive listing of
products and versions.
Select specific patches that you wish to
ignore for all products by clicking the Add
button under Ignore following patches.
Select the check boxes to determine the
severity level of the patches that you wish
to ignore.
Select the Enable SMS patch update check
box to update patches using SMS.
Enter the integrity measurement rule name.
Select the specific patches and then click
Add to move the patches from the
Non-members to the Members list.
Select the Enable SMS patch update check
box to update patches using SMS.
245