Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 64

Configuring Secure Access Devices Guide
46
Table 11: Administrator Role Configuration Details (continued)
Option
Access
Delegated Administrator Settings > Management of Admin realms
Manage ALL admin realms
Allow Add/Delete admin
realms
Function
Indicates the level of access
that you want to allow the
security administrator role to
set for system administrators.
NOTE: This option appears
only when you enable the
Manage All admin roles
option.
Manages all admin realms.
Allows the security
administrator to create and
delete administrator realms,
even if the security
administrator is not part of
the administrators role.
NOTE: This option only
appears when you choose to
enable the Manage All admin
realms.
Copyright © 2010, Juniper Networks, Inc.
Your Action
Select an access option:
Deny All—Specifies that
members of the security
administrator role cannot see
or modify any settings in the
category.
Read All—Specifies that
members of the security
administrator role can view,
but not modify, all settings in
the category.
Write All—Specifies that
members of the security
administrator role can modify
all settings in the category.
Custom Settings—Allows you
to pick and choose security
administrator privileges
(Deny, Read, or Write) for the
individual features within the
category.
Select Delegated Administrator
Settings > Management of
Admin realms > Manage ALL
admin realms.
Select to allow the security
administrator to add and delete
admin realms.